BACK TO PRODUCT CATEGORY
AJ-HPD2500 DISCONTINUED
Key Features

Three HD codecs supported

1080i and 720p recording and playback

Six P2 card slots and one SD card slot
  • Three HD codecs supported: AVC-Intra 100 for high-quality 10-bit 4:2:2 images, AVC-Intra 50, and DVCPRO HD
  • 1080i and 720p recording and playback. 59.94 Hz/50 Hz switchable
  • 1080/24PsF in/out, native 24p recording with the AVC-Intra codec
  • Up-/down-conversion between HD and SD
  • Six P2 card slots and one SD card slot
warranty

Versatile input and output terminals of the AJ-HPD2500 meet a wide range of broadcast station and CATV needs, from line and studio recording to editing, transmitting and archiving. This new P2 Mobile is also equipped with the RS-422A, RS-232C and 25-pin parallel remote control interfaces that are used by conventional VTR systems. Its networking functions and eSATA/USB 2.0 interface further allow the AJ-HPD2500 to serve as the core of a file-based broadcasting system, while allowing continued use of existing tape materials and serving as a flexible add-on to smooth the transition from a tape-based to a file-based system.

Please click here for a list of operation manuals to download.

  • Brochures
  • Broadcast and Professional Video Product Lineup Catalog PDF [Aug. 2019]
    Catalog PDF : Professional Video Product Lineup Catalog
Marketing
Brochures
Technical
Operating Instructions
Firmware

Service and Support
  • Broadcast and Professional Video Product Lineup Catalog PDF [Aug. 2019]
    Broadcast and Professional Video Product Lineup Catalog PDF [Aug. 2019]
    Catalog PDF : Professional Video Product Lineup Catalog
    Thu, 11/07/2019 - 06:06
    Download pdf - 10.18 MB
  • Broadcast & ProAV Operating Manual Database
    Broadcast & ProAV Operating Manual Database
    Link to the Panasonic global Operation Manual Database for Broadcast & ProAV Products
    Mon, 12/02/2018 - 13:50
    Download File

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

General service & downloads Contact technical support

There are currently no other services available.

Specifications

Power Source AC 100 V to 240 V, 50 Hz/60 Hz 65W (full option)
Operating Temperature 5°C to 40°C (41 °F to 104 °F)
Operating Humidity 10 % to 80 % (no condensation)
Weight 13 kg (28.66 lbs)
Recording Media P2 card, SD/SDHC Memory Card (AVCHD Recording*1)
Sampling Frequency AVC-Intra 100/DVCPRO HD (59.94 Hz): Y:74.1758 MHz, PB/PR:37.0879 MHz (50 Hz): Y:74.2500 MHz, PB/PR:37.1250 MHz DVCPRO 50: Y:13.5 MHz, PB/PR:6.75 MHz DVCPRO: Y:13.5 MHz, PB/PR:3.375 MHz
Resolution AVC-Intra 100: 1920 x 1080 (1080/59.94i, 1080/50i) 1280 x 720 (720/59.94p, 720/50p) AVC-Intra 50: 1440 x 1080 (1080/59.94i, 1080/50i) 960 x 720 (720/59.94p, 720/50p)
Frequency Response 20 Hz to 20 kHz, ±1.0 dB (reference level)
Dynamic Range More than 85 dB (1 kHz, emphasis off, “A” weighted)
Cross Talk Less than -80 dB (1 kHz, between 2 channels)
Headroom 20/18/12 dB switchable
SDI Input BNC x 1 (HD SDI Input/SD SDI Input switchable) HD Serial Digital: SMPTE 292M/296M/299M standard SD Serial Digital: SMPTE 259M-C/272M-A standard ITU-R BT. 656-4 (576/50i) standard
SDI Output BNC x 2 (HD SDI Output/SD SDI Output switchable) HD Serial Digital: SMPTE 292M/296M/299M standard SD Serial Digital: SMPTE 259M-C/272M-A standard ITU-R BT. 656-4 (576/50i) standard
Monitor Output XLR x 2 (CH1/CH2), low-impedance, +4/0/-3/-20 dBu switchable
USB 2.0 Host x 1, Device x 1
LAN 1000BASE-T/100BASE-TX/10BASE-T x 1
Keeping Temperature -20°C to 50°C (-4 °F to 122 °F)
Recording Video Signal see left page for detail
Quantizing AVC-Intra 100/AVC-Intra 50: 10 bits DVCPRO HD/DVCPRO 50/DVCPRO/DV: 8 bits
Compression Format AVC-Intra 100/AVC-Intra 50: MPEG-4 AVC/H.264 Intra Profile DVCPRO HD: DV-Based Compression (SMPTE 370M) DVCPRO 50/DVCPRO: DV-Based Compression (SMPTE 314M) DV: DV Compression (IEC61834-2)
Color Sampling AVC-Intra100: Y:PB:PR = 4:2:2
SDI (HD/SD) Input BNC x 1, (HD SDI Input/SD SDI Input switchable) HD Serial Digital: SMPTE 292M/296M/299M standard SD Serial Digital: SMPTE 259M-C/272M-A standard ITU-R BT.656-4 standard
SD Analog Composite Output BNC x 1 (Super On/Off)
SDI (HD/SD) Output BNC x 2, (HD SDI Output/SD SDI Output switchable) HD Serial Digital: SMPTE 292M/296M/299M standard SD Serial Digital: SMPTE 259M-C/272M-A standard ITU-R BT.656-4 standard
SD SDI MON Output BNCx1, SMPTE 259M-C/272M-A standard ITU-R BT. 656-4 (576/50i) standard
Output Gain - ∞ to + 3 dB or - ∞ to + 6 dB (Menu switchable)
Chroma Output Gain - ∞ to + 3 dB
Chroma Phase ± 30°
Setup Level ± 10%
SC Phase ± 180°
Distortion Less than 0.1% (16bits 1 kHz, emphasis off, reference level)
De-Emphasis T1=50 μsec, T2=15 μsec (On/Off auto)
Analog Input XLR x 2 (CH1/CH2), 600 ohms/high-impedance switchable, +4/0/-3/-20 dBu switchable
Digital Input BNC x 4 (CH1/2, CH3/4, CH5/6, CH7/8), AES/EBU format SMPTE 276M
Analog Output XLR x 2, low-impedance, +4/0/-3/-20 dBu switchable
Digital Output BNC x 4 (CH1/2, CH3/4, CH5/6, CH7/8), AES/EBU format SMPTE 276M
Headphones Stereo mini jack (3.5 mm diameter), 8 ohms, variable level
Time Code Input BNC x 1, 0.5 V[P-P] to 8.0 V[P-P], 10 k ohms
Time Code Output BNC x 1, 2.0 V[P-P] ± 0.5 V[P-P], low impedance
Recording Audio Signal 48kHz/16bits/8CH (AVC-Intra100/AVC-Intra50/DVCPRO HD) 48kHz/16bits/4CH (DVCPRO 50) 48kHz/16bits/2CH/4CH switchable (DVCPRO/DV)
Sink Phase ± 15 µs
RS-232C Input/Output D-sub 9pin, RS-232C Interface x 1
RS-422A Input/Output D-sub 9pin, RS-422A Interface x 1
Parallel D-sub 25pin x 1
Encoder Remote D-sub 15pin x 1
eSATA eSATA 3Gbit port x 1
General Specification
Dimensions (W x H x D) 424.0 mm x 175.2 mm x 414.7 mm (16-3/4” x 6-15/16” x 16-3/8” ) excluding feet, connector and jog dial.
Recording Format *2 See the spec file
Recording Time *3 See the spec file
Video Specification (Digital Video)
Video Input Signal
Analog Composite Input BNC x 1 (loop-through x 1), 75 ohms auto (Video In), 1.0 V[P-P] (75 ohms)
Reference Input Black Burst/HD 3 value SYNC, BNC x 1 (loop-through x 1), 75 ohms auto
Video Output Signal
Video Adjustment Range
Audio Specification (Digital Audio)
Sampling Frequency (Audio Specification) 48 kHz (sync video)
Quantizing (Audio Specification) 16 bit/24 bit (AVC-Intra 100/AVC-Intra 50) 16 bit (DVCPRO HD/DVCPRO 50/DVCPRO/DV)
Audio Input Signal
Audio Output Signal
SD SDI MON Output (Audio Output Signal) BNCx1, SMPTE 259M-C/272M-A standard ITU-R BT. 656-4 (576/50i) standard
Other Input/Output
Note *1: When using the AJ-YCX250G AVCHD codec board. Only possible when simultaneously recording P2HD and AVCHD. Recording only AVCHD is not possible. *2: To record and play back AVCHD is only possible when an AJ-YCX250G AVCHD codec board (optional) is installed. *3: All of the times apply when single clips are recorded continuously one after the other on the P2 card. Depending on the number of the clips to be recorded, the recordable time may be shorter than the times given. Weight and dimensions shown are approximate. Specifications are subject to change without notice.